Production process of mirror-finish stainless steel sheet

Production process of mirror-finish stainless steel sheet

SUNSONG is a factory focusing on the surface treatment of stainless steel sheet for more than 10 years.

Our Double-sides Mirror finish enjoys a good reputation in China and abroad.

We refined grinding and processing of the front and back of the stainless steel 2B original plate, so that both sides of the plate show 8K brightness and effect,.

The Double-sides Mirror sheets can be used for interior decoration and higher requirements of product processing.

We also have done much special work in our producing processes: Firstly, we installed the Fine grinding stone into our mirror polish production line, and it could remove the oxygen layer quite well, after this process, the mirror surface could remove water ripples and some other quality problems. Some other factories may have not this process. Secondly, we have process inspection, said to remove the sheets with scratches, kink marks before PVC coating. Thirdly, after the polishing, we have the process of washing and drying and then we do the PVC coating. (Our PVC standard is one layer of NOVACEL PVC inside with thickness of 0.07mm, and one layer of normal PVC with thickness of 0.06mm.) The PVC type could be specially produced per customers’ request. Finally, our package is fumigation wooden case which is table and suitable for sea transportation. The Package could be specially produced per customers’ request.